Southern Machinery

What problem we can help you solve?

1. How to build a LED assembly line?
2. How to choose a cost-effective LED SMT line?
3. What solution can reflect the quickest ROI (Return on Investment)?
4. What’s the true one stop solution?
5. What is the total cost for building a full LED SMT line?
6. In what situation should you choose a semi auto solution?

We welcome any of your inquiries, questions or concerns. Contact us to find out how to greatly save  on your manufacturing costs, and increase your benefits.

chan@smthelp.com
CLICK HERE TO SEND ME A EMAIL

Parts of common UIC spare parts list.
[table id=35 /]

For spare parts we can supply:
1.All of the wearing spare parts of SMT/AI, such as UIC ,Samsung ,Fuji,Juki,Panasonic and so on.
2.Used/New UIC parts which almost can’t be found at the market
chan@smthelp.com
CLICK HERE TO SEND ME A EMAIL

As we all konw ，it’s very necessary to verify  material component in SMT industry.

But we found that  some companies  are always using the operators ，it’s easy to make mistakes and waste time very much，and another companies verify material component by systems ，also so expensive and complex.

So，today I recommend you a machine to verify the material component.This is an auto insertion machine for PCB assembly from Southern Machinery in China, very efficient and reliable but low cost.

How to verify  SMT material  component ？It’s only need three steps .

And if  you are very interested in our machine，we can provide a chance of a free trial to you.You only need to  write the application form completely  to our email：info@smthelp.com，as following：

We designed and manufactured auto insertion machine，SMT equipment, and providing spare parts support .
We provide totally solution for LED lighting SMT PCB assembly.
Worldwide Installation and on site support.
Factory (machine and lighting assembly) training.

Large Triple Span Machines (5.0/7.5/10.0 mm Span) Insertion performance is maximized by considering the jaw tooling design when laying out the PC board hole patterns (the jaw clamps secure the component leads against the fixed surfaces of the jaw guide). For best results, the insertion hole spans in the PC board should be designed as follows: • For 5.0 mm Spans: – Round leads: One lead diameter + 4.50 mm (0.177 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 4.50 mm (0.177 in.) = Recommended Lead Hole Span • For 7.5 mm Spans: – Round leads: One lead diameter + 7.04 mm (0.277 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 7.04 mm (0.277 in.) = Recommended Lead Hole Span • For 10.0 mm Spans: – Round loudens lead diameter + 9.58 mm (0.377 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 9.58 mm (0.377 in.) = Recommended Lead Hole Span

CLICK HERE TO SEND ME A EMAIL

Replaces manual processes for fast ROI, lower OPEX, faster time to market and improved quality

Southern Machinery provide the whole line installation ,training and after sales services. Improve efficiency , reduce cost.