Southern Machinery
Southern Machinery
SMT & THT PCB Assembly Automation for EMS Factories
The 90° PCB Turn Conveyor is used for changing the direction of flow of a PCB assembly line.
The PCB is transferred onto the built-in belt conveyor which turns either 90° clockwise or counter clockwise.
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
Plc Control
Diameter: 3mm Edge Round Belt
Air Pressure: 5kgf/cm2
Power: Ac220v, 50/60 Hz, 1 Phase
Pcb Convey Directon: L-r ( Or R-l)
Front Rail Fxed ( Or Rear Rail Fxed)
Conveyor Height:900+/-50mm
Conveyor Speed: 10m/s
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) |
| SCN250 | 500*563*1200 | 50*50-330*250 | 150KG |
| SCN330 | 580*643*1200 | 50*50-400*330 | 170KG |
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
The Manual Lift Gate Conveyor is used when a passage way is required in a production line.
By manual lifting the conveyor section, access is gained to the rear of the line. (semiautomatic).
PLC Control system.
Cylinder assisted lifting motion
Width adjustment by hand crank.
Pneumatic locking device installed to enhance safety.
SMEMA compliant.
CE certified
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) |
| SLC400W-N | 1300*570*1050 | 50*50-445*400 | 180KG |
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
The PCB NG/OK Unloader is used for good/bad PCB separation. The OK and NG PCB
after being tested by test machine can be separated and sent to magazines
Omron PLC Control system.
Touch screen easily operation.
Good and bad PCB’s can be separated automatically with magazine rack.
Multiple pitches selectable.
Direction from left to right, or right to left (optional).
SMEMA compliant.
RoHs .CE certified
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) | Rack size(L*W*H.MM) |
| SNL250 | 1510*1530*1250 | 50*50-330*250 | 310KG | 355*320*563 |
| SNL330 | 1910*1630*1250 | 50*50-445*330 | 340KG | 460*400*563 |
| SNL390 | 2160*1760*1250 | 50*50-530*390 | 370KG | 535*460*563 |
| SNL460 | 2160*1900*1250 | 50×50-530×460 | 400KG | 535*530*563 |
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
User friendly touch screen control panel;
Uninterrupted loading;
Smooth and parallel with adjustments
Small machine footprint;
Automatically senses stack height
Pass-through function
SMEMA compatible
PCB Size – 50 mm L x 50 mm W to 400 mm L x 350 mm W ( Optional: 460mm width)
PCB Stack Capacity – 400 pcs. (0.6 mm thickness) or 240 mm (9.45″)
stack height PCB Thickness – 0.4 mm min. (0.016″ min.)2.5 mm max. (0.098″ max.)
Conveyor Direction – Left to right (standard) or right to left (optional) operation
Conveyor – 3 mm Edge Belt
Air Supply Pressure – 5-6 Kg/cm2 (70-85 psi)
Air Consumption – 30 l/min (1 CFM)
Voltage – 220 VAC, 50/60 Hz Power 150 VA max.
Machine Dimensions – 728 mm L x 700 mm W x 1127 mm H
Net Weight – 160kg
Shipping Weight – 200 Kg
contact us：shaoyogn@smthelp.com WhatsApp：+86 137 6048 1664
This equipment is used SMT circuit board production line operating upper and lower plates.
Magazine quantity: upper 1pc, bottom 1pc.
Tank Replacement time: about 30 seconds or a user specified
step select: 10,20,30,40 mm or user
spec. 110V or 220V, single phase max 250VA.
Barometic pressure from 4-6 bar, up to 10/min
Flexible platform to suit standard magazines. Regulated pressure on attached pneumatic pusher. Pusher position adjustable to centre of the magazine. User friendly “soft touch” LED membrane controlpanel.
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) | Rack size(L*W*H.MM) |
| SUL250 | 1730*765*1250 | 50*50-330*250 | 160KG | 355*320*563 |
| SUL330 | 2065*845*1250 | 50*50-445*330 | 220KG | 460*400*563 |
| SUL390 | 2660*909*1250 | 50*50-530*390 | 280KG | 535*460*563 |
| SUL460 | 2660*970*1250 | 50×50-530×460 | 320KG | 535*530*563 |
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
This equipment is used SMT circuit board production line operating upper and lower plates.
Magazine quantity: upper 1pc, bottom 1pc.
Tank Replacement time: about 30 seconds or a user specified
step select: 10,20,30,40 mm or user
spec. 110V or 220V, single phase max 250VA.
Barometic pressure from 4-6 bar, up to 10/min
Flexible platform to suit standard magazines. Regulated pressure on attached pneumatic pusher. Pusher position adjustable to centre of the magazine. User friendly “soft touch” LED membrane controlpanel.
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) | Rack size(L*W*H.MM) |
| SLD250 | 1330*765*1250 | 50*50-330*250 | 140KG | 355*320*563 |
| SLD330 | 1650*845*1250 | 50*50-445*330 | 200KG | 460*400*563 |
| SLD390 | 1800*909*1250 | 50*50-530*390 | 240KG | 535*460*563 |
| SLD460 | 1800*970*1250 | 50×50-530×460 | 300KG | 535*530*563 |
contact us：shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
How length conveyor do you need?
What is the maximum width of you PCB?
Do you need inspection with lighting
Do you need dual rail?
Do you need cover with cooling fan?
Do you need buffer bad boards?
Do you need working table both side?
We are able to customize conveyors
| Item | Model | Length(mm) | Max PCB Width(mm) | Remark |
| 1 | S-350C | 500 | 350 | No Lighting |
| 2 | S-460C | 500 | 460 | No Lighting |
| 3 | S-350C-L | 500 | 350 | With Lighting |
| 4 | S-460C-L | 500 | 460 | With Lighting |
| 5 | S-350D | 1000 | 350 | No Lighting |
| 6 | S-460D | 1000 | 460 | No Lighting |
| 7 | S-350D-L | 1000 | 350 | With Lighting |
| 8 | S-460D-L | 1000 | 460 | With Lighting |
| 9 | S-350E | 1500 | 350 | No Lighting |
| 10 | S-460E | 1500 | 460 | No Lighting |
| 11 | S-350E-L | 1500 | 350 | With Lighting |
| 12 | S-460E-L | 1500 | 460 | With Lighting |
PCB Magazine Type Buffer Technical Parameters
• Description: This Device Used For Receiving NG Board Or Memory Board
• No.Of Magazine: Upper Conveyor: 1 Magazine; Lower Conveyor:2 Magazine
• Indexing Pitch: 10.20.30.40mm Or Specify
• Power Source: AC 110 Volts Or 220 Volts; Single Phase
• Power Consumption: Max 250VA
• Air Pressure & Air Consumption: 4-6bar, 15ltr/Min
• Transport Height: 900±20MM
• Transport Direction: From Left To Right Or Right To Left
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) | Rack size(L*W*H.MM) |
| SBM250 | 1150*1150*1205 | 50*50-330*250 | 160KG | 355*320*563 |
| SBM330 | 1350*1350*1205 | 50*50-445*330 | 220KG | 460*400*563 |
| SBM390 | 1550*1550*1205 | 50*50-530*390 | 280KG | 535*460*563 |
| SBM460 | 1750x1750x1205 | 50×50-530×460 | 340KG | 535*530*563 |
shaoyong@smthelp.com WhatsApp：+86 137 6048 1664
It can be used to load PCBs onto the production line from either magazines or stacks, simplifying double-sided board assembly. Ideal for double-sided assembly. Load bare boards from stacks or partial assemblies from magazines
Selectable pitch 10mm up to 40mm
Diameter 3mm edge round belt
Component clearance: top 80mm bottom 20mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R ( Or R-L)
Front rail fixed ( or rear rail fixed)
Conveyor height:900+50/-20mm
Stack Height: 200mm
Conveyor speed: vacuum loading 15s/pc, loading 7s/pc
| Model | Dimension (L*W*H.MM) | Effection PCB size | Weight(KG) | Rack size(L*W*H.MM) |
| SLD250L | 1500×870×1200 | 50*50-350×250 | 250 KG | 355*320*563 |
| SLD330L | 1860×950×1200 | 50*50-460×330 | 300KG | 460*400*563 |
| SLD390L | 2100×1000×1200 | 50*50-535×390 | 340KG | 535*460*563 |
| SLD460L | 2100×1080×1200 | 50×50-535×460 | 360KG | 535*530*563 |
shaoyong@smthelp.com WhatsApp：+86 137 6048 1664