Southern Machinery

Fully automatic dispensing system bench top automatic visual glue dispenser  Automatic visual glue dispenser    is used to Chevrons,  fridge magnets, key chains,  power supply, cell phone,energy saving light, LED, DVD, DC, Switch, Connector, relay and other industries needing fluid glue solder.

Feature of  Glue dispensing equipment

1 Improve the production efficiency,reduce artifical loss.

2 Equipped with high performance CCD vision positioning system,visual dispensing route,improve accuracy.

3 Use industrial computer to control  operating system,

4 According to the different artifacts, choose suitable LED light source for lighting.

5 Adopt servo motor, ball screw drive.

6 It can arbitrary match with needle valve, diaphragm valve,screw valve, pnematic injection valve, piezoelectric injection valve.

 

 

When defect rates are higher than what the machine’s Cpk would indicate 

according to this table, it is due to one of several things: machine set-up or 

maintenance issues, process issues, component imperfections,  etc.

“Southern Machinery – World’s Choice for SMT/THT Machines & Spare Parts”

Heat transfer and equipment

How to profile, variables to consider

Understanding and designing the “Best profile”

Understanding what the profile does

The following presentation

covers the main processes

during the production of

a multi-layer PCB. Ask for more, please contact : jasonwu@smthelp.com

SMT Whole production line solution for PCB Assembly, like LED Display, Car Audio, White goods.

S-4000 Series Axial insertion machine is insert axial component which was sequence the components from tape on the chain conveyor as program  and JW to PCB, and clinch and cutter,  fixed axial component on PCB. 

Feature: Insert JW into PCB directly, no need make into tape again. It can save 1/3 JW. The insertion head is steady, the rotary table is movable, include vertical or horizontal direction, ensure precisely insert components in PCB.

SPEC:

1	Insertion rate	22000PCS / H
2	Insert direction	Parallel 0°,90°,180°,270°
3	Components span	Dual span: 5.0mm-20mm(Insert jumper wire can reach 5mm-20mm)
4	PCB Size	(Min)50 mm x50mm、(Max)450mm x 450mm
5	Components available	Capacitors, transistors, diodes, resistors, fuse and so on, must be Tape packed electronic components.
6	Jumper Wire (JW)	Independent feed device, no need sequencing.. diameter 0.5mm-0.7mm copper wire plated with tin.
7	Clinch Length	1.2-2.2MM (adjustable)
8	Clinch degree	10-35°(adjustable)
9	Machine Size (L × W ×H)	1830mm×1200mm×1720mm
10	Machine Weight	1500KG
11	Power supply	220V, AC (single phase) 50/60 HZ, 1.5KVA;
12	System Protection	UPS, keep machine run 15 minutes without power
13	Working Power	800W (Energy-saving)
14	Air pressure	0.5 Mpa
15	Air consumption	0.1 m3/minute
16	Coordinate correction	Machine vision systems, multi-point MARK vision correction.
17	Driving system	AC Servo、 AC motors
18	Data input	USB interface input (EXCEL format)
19	Control System	English version interface (WINDOWS system control platform)LCD monitor
20	Rotary table	Clockwise or anticlockwise
21	PCB transfer mode	Manual /Automatic optional

 

Electrical industries appliances：Air conditioner, Television, Microwave, Electric cooker, Electric kettle, Induction cooker etc.

Vehicle industries application: Vehicle power supply, Vehicle light, Car audio etc.

Power supply appliance: Vehicle power supply, Energy saving power supply, Ballast etc.