Southern Machinery
Southern Machinery
SMT & THT PCB Assembly Automation for EMS Factories
Before manufacturing led lights, it’s very important to conduct SMT factory planning, especially for any newly-built SMT factory. New factories have little experience in SMT factory design layout and SMT workshop design so there may be some details lost during the set-up phase. After production begins, discovering problems after the fact can cause unnecessary losses. So why not design your SMT factory layout and plan with these potential issues in mind and prepare in advance? Learn SMT clean mounting workshop production requirements in this article.
SMT workshop production requirements:
1. Workshop bearing capacity, vibration, noise requirements:
Factory ground bearing capacity should be greater than 8 kn/m2.
Vibration should be controlled in less than 70 db, the maximum value of no more than 80db.
The noise should be controlled within 70 dba.
2. Power supply:
General requirements of single-phase AC220 (220 + / – 10%, 0/60 hz), three-phase AC
380 (380 + / – 10%, 50/60 hz), more than double the power consumption of power supply of power than.
3. Air:
According to the requirement of the equipment configuration of air pressure, can use plant air, and also be configured individually oil-free compressed air machine, general pressure is greater than 7 kg/cm2.
For clean, dry cleaning the air, so the need for compressed air to oil, dust and water treatment.Made from stainless steel or pressure plastic air duct.
4. Exhaust:
Reflow soldering and wave soldering equipment need exhaust fan.For hot blast stove, exhaust pipe of the minimum flow rate value is 500 cubic feet per minute (14.15 m3 / min).
5. Lighting:
In the ideal of the plant Illumination is 800 ~ 1200 lux, at least not less than 300 lux, when low intensity of illumination, in the inspection, repair, measurement work areas should install local lighting.
6. Work environment:
Factory to keep clean, no dust, no corrosivegas.Production workshop should have cleanliness control, control the cleanliness: the class of 500000.
Production workshop environment temperature to 23 + / – 3 ℃ is the best, average of 17 ~ 28℃,relative humidity is 45% ~ 45% RH.
S600-OF SERIES
AUTO INSERT&SURFACE MOUNTING MACHINE
The s-600-of is a revolutionary new concept from southern machinery.
that allows the placement or insertion of both surface mount
and through-hole components.
Nozzle: 6 PCS
?PCB Size:400*360mm
?Speed:12000-15000CPH
?Insert Object:Capacitor,Switch,
Connector, etc.
?Mounting Objet:Standard SMD
CLICK HERE TO SEND ME A EMAIL
[su_heading size=”25″ margin=”10″] More Reasons to Choose the Pneumatic Stencil Cleaner S-1688: [/su_heading]
1. Zero pollutants from SMT stencil cleaning machine; protects our earth.
2. 2-grade filter for SMT stencil cleaning machine cleaning fluid circulation use.
3. 3 minutes to complete a SMT stencil cleaning cycle.
4. Improves the quality of your electronic products and PCBA welding effect.
5. Saves Energy & Eliminates Fire hazard (no electrical cord).
6. No VOCs, protection of the environment above regulatory standards.
7. Reduces costs on cleaning solutions, as it is recycled back into the closed system.
[su_button url=”mailto: chan@smthelp.com” background=”#00a3b3″ size=”5″]CLICK HERE TO SEND US AN EMAIL[/su_button]
http://www.slideshare.net/Jessicaxiong4/s1688-stencil-cleaner-machine-2016
http://www.slideshare.net/Jessicaxiong4/s1688-stencil-cleaner-machinecatalog
Automatic Pheumatic Stencil Cleaner
1, Zero pollutant of SMT stencil cleaning machine, protect our earth.
2, 2 grade filter for SMT stencil cleaning machine cleaning fluid circulation use.
3, 3 minutes to complete a SMT stencil cleaning, improving the quality of your electronic products.
4, Zero power consumption ， to save energy.
5,Environmental protection, please use our full pneumatic SMT stencil cleaning machine.
6, Improve PCBA welding effect, use our full pneumatic SMT stencil cleaning machine.
7, No need electronic power, no fire and detonate caused.
chan@smthelp.com
CLICK HERE TO SEND ME A EMAIL
Our South Machinery Company is a professional supplier of
customized automotive insertion machine.Being endowed with more than 20 years of experience in electronic manufacturing ,our professional engineers/technical teams can provide you
excellent 7X24 hours service anywhere and anytime .
chan@smthelp.com
CLICK HERE TO SEND ME A EMAIL
What problem we can help you solve?
- How to build a LED assembly line?
- How to choose a cost-effective LED SMT line?
- What solution can reflect the quickest ROI (Return on Investment)?
- What’s the true one stop solution?
- What is the total cost for building a full LED SMT line?
- In what situation should you choose a semi auto solution?
We welcome any of your inquiries, questions or concerns. Contact us to find out how to greatly save on your manufacturing costs, and increase your benefits.
chan@smthelp.com
CLICK HERE TO SEND ME A EMAIL
Southern Machinery provide the whole line installation ,training and after sales services. Improve efficiency , reduce cost.